220V 7W Power Led Board Module IP65 Y32 6000-6500K White

This compact COB LED module is mounted on an aluminum PCB and integrates a Smart IC for direct AC 220–240 V operation—no external LED driver required. Ideal for hobby lighting projects, fixture repairs, and engineering prototypes where a slim, efficient light source is needed.

⚙️ Key Features

• ⚡ Direct AC 220–240 V input — no external LED driver needed
• 💡 7 W COB LED with integrated SMD Smart IC
• ❄️ Cold White 6000–6500 K with CRI Ra80 for consistent color rendering
• 📐 Wide 270° beam angle for broad, uniform illumination
• 🛡️ IP65 designation and durable aluminum substrate for enhanced reliability
• 🌡️ Up to 30,000 hours lifespan with proper heatsinking and thermal management

📐 Technical Specifications

• Model: Y32
• Power: 7 W
• Input Voltage: AC 220–240 V (220 V / 230 V / 240 V)
• LED Type: COB with SMD Smart IC (integrated control)
• Color Temperature (CCT): 6000–6500 K Cold White
• Color Rendering Index (CRI): Ra80
• Beam Angle: 270°
• Housing/Board Material: Aluminum PCB
• Ingress Protection: IP65 (see installation notes)
• Rated Lifespan: up to 30,000 hours (with a good heatsink)

🔧 Applications

• 
  DIY and hobby lighting builds
• Repair or retrofit of compatible LED lighting fixtures
• Task lights, shop lighting, and utility luminaires
• Prototype development for electronics components and modules

🧩 Integration Tips for Makers & Engineers

While this module runs from mains voltage, it can be integrated into control systems using safe, isolated interfaces. For projects involving a microcontroller such as Arduino or Raspberry Pi, use appropriate galvanic isolation (e.g., opto-isolated SSR or relay) for on/off control. Do not connect the module directly to low-voltage I/O.

• On/Off: use an AC-rated SSR or relay module with proper creepage/clearance.
• Dimming: compatibility is not specified—treat as non-dimmable unless verified with a suitable, isolated controller.
• Thermal: mount to an adequate heatsink using thermal paste or pad to achieve rated life.

⚠️ Safety & Installation Notes

• ⚡ This product operates at dangerous mains voltage (AC 220–240 V). Only qualified persons should install.
• Ensure robust electrical insulation and strain relief on all connections; verify there are no short circuits before power-up.
• Disconnect power before handling or wiring. Do not touch the board when energized.
• Keep away from liquids during installation and operation. For outdoor or damp locations, maintain the IP65 rating by using appropriate enclosures, seals, and gaskets.
• Provide sufficient heatsinking; inadequate thermal management will reduce lifespan.