💡 220V 50W COB Power LED Module, IP65, 6000–6500K Cool White

This high-efficiency COB LED module integrates a SMD Smart IC driver on an aluminum PCB, enabling direct connection to AC 220–240V mains without an external LED driver. Ideal for DIY lighting, fixture repairs, and custom builds, it delivers bright 6000–6500K cool white illumination with a wide beam angle.

✨ Key Features

• Driverless operation: Connects directly to AC 220–240V (220V/230V/240V) — no separate LED driver required.


• COB LED technology with integrated SMD Smart IC for compact, efficient lighting.


• IP65 rated enclosure compatibility for dust-tight and water-jet resistance when properly installed. 💧


• Cool White 6000–6500K for crisp, high-clarity lighting.


• CRI ≥ Ra80 for accurate color rendering.


• Wide 270° beam angle for broad, uniform light distribution.


• Aluminum substrate for effective heat dissipation; long life with proper heatsinking.

🧰 Applications

• Hobby and DIY lighting projects, work lamps, and utility lights.


• Repair or retrofit of faulty lighting fixtures such as floodlights and area lights.


• Prototyping with electronics components and modules in lab or workshop environments.


• Microcontroller-based control (e.g., Arduino, Raspberry Pi) via appropriately rated relay/SSR/triac dimmer modules — not directly from GPIO.

⚠️ Safety & Handling

• Mains voltage hazard: This module operates at AC 220–240V. Ensure robust electrical insulation, secure wiring, and proper strain relief. ⚡


• Non-isolated design is typical for driverless modules — treat all exposed pads and heatsink areas as potentially live. Use insulated standoffs and enclosures.


• Avoid contact with liquids; ensure there are no short circuits before powering on.


• Maintain the IP65 rating by using suitable gaskets, sealed connectors, and enclosures during installation.


• Provide adequate thermal management: mount to a substantial heatsink with thermal compound. Allow cooling before handling. 🌡️

📐 Technical Specifications

• Power: 50W


• Input Voltage: AC 220–240V (220V / 230V / 240V)


• LED Chip Model: SMD Smart IC, COB


• Color Rendering Index (CRI): Ra ≥ 80


• Correlated Color Temperature (CCT): 6000–6500K (Cool White)


• Beam Angle: 270°


• Lifespan: ≈30,000 hours (with a good heatsink)


• Housing/PCB Material: Aluminum


• Ingress Protection: IP65 (when correctly installed) 💧

🧩 Integration Notes for Makers & Engineers

• Control: For on/off or dimming via Arduino or Raspberry Pi, use a mains-rated relay, solid-state relay (SSR), or triac dimmer module. Do not connect directly to low-voltage GPIO.


• Polarity/Wiring: Connect to AC line and neutral with secure terminations; add a fuse and surge protection as appropriate.


• Thermal: Use thermal paste and a suitably sized heatsink; ensure airflow for longevity.

Note: Professional installation is recommended. Always follow local electrical codes and best practices when working with high voltage systems.