220V 3W Power Led Board Module IP65 Y32 6000-6500K White (Y32)💡

The 3W IP65 Y32 LED module combines a COB LED with an integrated SMD Smart IC driver on an aluminum PCB, enabling safe, efficient, and compact lighting solutions. Designed for direct AC 220–240V operation, this module requires no external LED driver, making it ideal for hobby lighting projects, rapid prototyping, and repairing faulty lighting fixtures. With a wide 270° beam angle, Ra≥80 CRI, and a 30,000-hour rated lifespan (with proper heat sinking), it delivers reliable cold-white illumination for makers and professionals.

✨ Key Features

• Direct mains operation: AC 220–240V input (no external LED driver required) ⚡
• 3W COB LED with integrated SMD Smart IC driver 🧠
• Cold White 6000–6500K color temperature for crisp, high-contrast light ❄️
• CRI Ra≥80 for accurate color rendering 🎨
• 270° wide beam angle for broad area illumination 🌐
• IP65 dust- and water-resistant rating for robust applications 🛡️
• Aluminum substrate for efficient thermal performance 🧊
• Up to 30,000 hours lifespan with a suitable heatsink ⏱️

🔧 Typical Applications

• DIY and hobby lighting projects
• Repair or retrofit of faulty lighting fixtures
• Prototype luminaires, task lights, and indicators
• General-purpose illumination for enclosures and panels

📐 Technical Specifications

• Power: 3W
• Input Voltage: AC 220–240V (220V / 230V / 240V)
• LED Chip / Driver: SMD Smart IC + COB
• Color Rendering Index (CRI): Ra80
• Color Temperature: Cold White 6000–6500K
• Beam Angle: 270°
• Lifespan: 30,000 hours (with good heatsink)
• Housing Material: Aluminum
• Ingress Protection: IP65

🌡️ Thermal & Installation Guidelines

• Mount the module to a suitable heatsink or metal surface using thermal compound or pads to achieve the rated lifespan.
• Ensure adequate ventilation and avoid enclosed spaces with poor airflow.
• Provide proper creepage/clearance and electrical insulation from mains wiring and conductive surfaces.
• If used in damp environments, maintain the IP65 integrity through appropriate sealing and strain relief.

⚠️ Safety Notice (Mains Voltage)

• This module is powered directly from AC 220–240V. Treat all pads and connections as live when energized.
• Use proper insulation and secure wiring. Avoid contact with liquids; moisture ingress can be hazardous.
• Verify there are no short circuits before applying power.
• Disconnect mains power before installation or handling. Allow the module to cool after operation.

🔌 Use with Microcontrollers (Arduino / Raspberry Pi)

While this is a standalone AC LED module and not driven directly by a microcontroller, you can switch it on/off from Arduino or Raspberry Pi systems using an appropriately rated, isolated relay or solid-state relay (SSR). Do not connect the module directly to low-voltage electronics components or share grounds. Always ensure galvanic isolation when interfacing with control circuits.