220V 3W Power Led Board Modul IP65 Y27 2800-3200K Warm White

Compact and efficient, this 3W COB LED module integrates a SMD Smart IC driver on an aluminum PCB (MCPCB), enabling direct connection to AC 220–240V mains with no external LED driver required. Ideal for DIY lighting, fixture repairs, and prototyping by electronics engineers and hobbyists working with electronics components, modules, and smart control systems.

• Direct AC 220–240V operation — plug-and-play with household mains
• Warm White 2800–3200K output for comfortable ambient lighting
• CRI Ra≥80 for natural color rendering
• Wide 270° beam angle for uniform illumination
• IP65 rated module designation for dust and water jet resistance (ensure proper sealing in application)
• Aluminum substrate for effective heat dissipation
• Long service life: 30,000 hours with adequate heatsinking

🔧 Typical Applications

• Repairing or retrofitting ceiling lights, sconces, and utility fixtures
• DIY lamps, signage backlighting, and hobby lighting projects
• AC lighting controlled via relays, SSRs, or TRIACs driven by Arduino or Raspberry Pi (use proper isolation)
• Test benches and evaluation setups for LED modules and electronics components

📐 Specifications

• Model: Y27
• Power: 3W
• Input Voltage: AC 220–240V (220V / 230V / 240V)
• LED Technology: SMD Smart IC Chip, COB
• Color Temperature: Warm White 2800–3200K
• Color Rendering Index (CRI): Ra80
• Beam Angle: 270°
• Lifespan: 30,000 hours (with good heatsink)
• Housing Material: Aluminum
• Ingress Protection: IP65 (proper enclosure/sealing required in final installation)

❄️ Thermal Management & Installation

For reliable performance and longevity, mount the module onto an appropriate heatsink or metal surface using thermal compound or pads to ensure good thermal contact. Provide adequate airflow and avoid enclosed spaces without heat dissipation. Secure wiring and strain relief are recommended for vibration-resistant installations.

⚡ Electrical Safety Notice

• DANGER — Mains Voltage: This module connects directly to AC 220–240V. Only qualified individuals should install it.
• Ensure electrical insulation of all live parts; use insulated connectors and heat-shrink tubing.
• Disconnect power before handling or wiring. Do not touch the board while energized.
• Avoid contact with liquids; ingress can cause electric shock and damage.
• Prevent short circuits and ensure proper creepage/clearance distances.
• Use suitable fusing and comply with local electrical codes.

🧠 Control & Integration Tips

This AC LED module is not intended for direct connection to low-voltage systems such as Arduino or Raspberry Pi. For automation, switch the AC line using an appropriately rated, isolated relay, solid-state relay (SSR), or TRIAC driver module. Dimming capability is not guaranteed; verify compatibility before using dimmers.