220V 20W Power Led Board Module IP65 6000-6500K White

The 20W COB LED board is a high-efficiency lighting module built on an aluminum PCB with an integrated Smart IC driver. It runs directly from AC220–240V mains power—no external LED driver required. Ideal for DIY lighting, fixture repair, and custom builds, this compact light engine delivers a crisp 6000–6500K cool white output with a Color Rendering Index of Ra≥80.

💡 Key Features

• Direct 220–240V AC input — driverless design with integrated Smart IC
• 20W high-output COB LED for uniform illumination
• Cool White 6000–6500K for bright, daylight-like lighting
• CRI Ra≥80 for accurate color rendering
• Wide 270° beam angle for broad light distribution
• IP65 rating per product spec for dust and water resistance
• Aluminum MCPCB for effective heat dissipation
• Lifespan up to 30,000 hours with appropriate heatsinking
• Great for DIY electronics, fixture repairs, and hobby lighting projects

📐 Technical Specifications

• Power: 20W
• Input Voltage: AC220–240V (220V / 230V / 240V)
• LED Chip Model: SMD Smart IC (driver-on-board), COB
• Color Rendering Index (CRI): Ra80
• Correlated Color Temperature (CCT): White 6000–6500K
• Beam Angle: 270°
• Lifespan: 30,000 hours (with good heatsink)
• Housing/PCB Material: Aluminum
• Ingress Protection: IP65 (as specified)

🧊 Thermal & Mechanical Guidance

• Mount the module to a suitably sized heatsink using thermal paste/pad to achieve the stated lifespan.
• Ensure good airflow if used in enclosed fixtures.
• Do not operate without proper thermal management.

🔧 Applications

• Replacement for faulty LED light engines in fixtures
• Custom lamp builds, utility lighting, and maker projects
• Prototyping in electronics projects and workshops

🛡️ Safety & Handling (Mains Voltage)

WARNING: This module is powered directly from 220V AC. Improper use can cause electric shock, fire, or injury.

• Ensure proper electrical insulation and secure mounting.
• Keep away from liquids; do not expose to moisture during installation or operation.
• Verify there are no short circuits before powering.
• Only qualified users should handle mains wiring. Disconnect power before servicing.

🤖 Use with Arduino / Raspberry Pi

This is a mains-powered LED module and is not driven directly by low-voltage microcontrollers such as Arduino or Raspberry Pi. For on/off control, use a properly rated, isolated relay, solid-state relay (SSR), or opto-isolated triac module designed for AC mains. Maintain safe creepage/clearance and observe local electrical codes.

What’s Included

• 1 × 20W 220V COB LED Board Module (IP65, 6000–6500K)

Keywords: AC LED module, driverless LED, COB light engine, electronics components, DIY modules, high-voltage LED, microcontroller control via relay, voltage 220V, Arduino, Raspberry Pi.