220V 10W Power Led Board Module IP65 6000-6500K White

Compact and efficient, this COB LED module integrates an SMD Smart-IC driver on an aluminum PCB for direct connection to AC 220–240V mains. No external LED driver is required, making it ideal for DIY lighting, fixture repairs, and rapid prototyping with common electronics components and modules.

💡 Key Features

• Direct AC operation: Works from AC 220–240V household mains — no external driver needed.
• 10W white light output at 6000–6500K (cool white).
• COB emitter with integrated SMD Smart-IC constant-current control.
• CRI Ra80 for natural color rendering.
• Wide 270° beam angle for uniform area illumination.
• Aluminum substrate for efficient heat dissipation.
• Lifespan up to 30,000 hours with an adequate heatsink.
• IP65 suitability when properly sealed in a compatible enclosure.

🛠️ Applications

• Repairing or upgrading mains-powered lighting fixtures (bulbs, floodlights, work lamps).
• DIY and hobby lighting projects, prototypes, and test rigs.
• Bench/task lighting and enclosure lighting for projects using Arduino, Raspberry Pi, and other microcontroller systems (via mains switching).

🔧 Integration Notes

• This is a mains-voltage LED board. Do not connect directly to low-voltage logic such as Arduino or Raspberry Pi GPIO. Use appropriate relay or solid-state relay (SSR) modules for safe control.
• Mount firmly to a suitable heatsink using thermal compound/pad to achieve the stated 30,000h lifespan.
• For IP65 performance, install inside an appropriately sealed housing with correct gaskets and cable glands.
• Dimming is not specified; use as on/off unless verified with your application.

⚠️ Safety Warning

• Danger: High voltage. Operates at AC 220–240V. Risk of electric shock and fire if misused.
• Ensure proper electrical insulation, secure connections, and adequate creepage/clearance.
• Do not touch the board while powered; isolate mains before handling.
• Avoid contact with liquids; moisture can cause short circuits and hazards.
• Use a fused circuit and follow local electrical codes. Enclose the module for user safety.

📐 Specifications

• Power: 10W
• Input Voltage: AC 220–240V (supports 220V / 230V / 240V)
• LED Chip Model: SMD Smart-IC driver, COB package
• Color Temperature (CCT): White 6000–6500K
• Color Rendering Index (CRI): Ra80
• Beam Angle: 270°
• Lifespan: 30,000 hours (with good heatsink and thermal management)
• Housing / PCB Material: Aluminum
• Ingress Protection: IP65 (when installed in a suitable sealed enclosure)
• 

📦 Package Contents

• 1 × 220V 10W COB LED Board Module (White 6000–6500K)