220V 7W Power Led Board Modul IP65 Y27 2800-3200K Warm White

This compact COB LED module integrates a Smart IC driver on an aluminum PCB, enabling direct connection to AC 220–240V mains without an external LED driver. Designed for both electronics hobbyists and engineers, it’s ideal for lighting projects, fixture repairs, and general-purpose illumination where a wide beam and warm, natural light are desired.

✨ Key Features

• Direct 220–240V AC input — no external LED driver required
• 7W warm white output at 2800–3200K for comfortable ambient lighting
• COB with integrated SMD Smart IC constant-current control
• IP65 rating for dust-tight and water-resistant performance (Y27)
• Wide 270° beam angle for uniform light distribution
• CRI Ra≥80 for accurate color rendering
• Aluminum substrate for efficient heat dissipation
• Rated lifespan up to 30,000 hours with proper heatsinking

📐 Technical Specifications

• Power: 7W
• Input Voltage: AC 220–240V (220V / 230V / 240V)
• LED Technology: COB with SMD Smart IC driver
• Color Temperature: Warm White 2800–3200K
• Color Rendering Index (CRI): Ra80
• Beam Angle: 270°
• Lifespan: 30,000 hours (with good heatsink)
• Housing/Board Material: Aluminum
• Ingress Protection: IP65 (model Y27)

🔧 Typical Applications

• Fixture repair and retrofit of mains-powered luminaires
• DIY lighting projects and prototyping with electronics components
• Cabinet, signage, and accent lighting requiring a wide beam
• General-purpose illumination where warm white light is preferred

🤖 Integration Tips (Arduino / Raspberry Pi)

While this module operates directly from mains voltage, you can control its on/off state in automation projects using a relay module or solid-state relay (SSR) driven by a microcontroller such as Arduino or Raspberry Pi. Ensure proper electrical isolation between low-voltage control circuits and high-voltage AC lines.

• Use relays/SSRs rated for AC 220–240V and sufficient current
• Maintain creepage/clearance and enclosure safety; follow local electrical codes
• Do not connect the LED module directly to any low-voltage microcontroller pins

⚠️ Safety & Handling

• Danger: Mains Voltage. This product is powered directly from AC 220–240V. Handle only if you are qualified to work with high voltage.
• Insulation: Ensure robust electrical insulation on all connections; prevent exposure to moisture despite the IP65 rating.
• No liquids: Keep away from water during installation; liquid ingress can cause electric shock or failure.
• Short-circuit prevention: Verify wiring and clearances before energizing.
• Power off before service: Disconnect mains before handling or mounting.

❄️ Thermal Management

• Mount the aluminum PCB to a suitable heatsink for reliable operation
• Use thermal interface material (paste/pad) and secure with appropriate hardware
• Adequate cooling is required to achieve the stated 30,000-hour lifespan

Note: Specifications preserved as provided. For optimal results in Arduino or Raspberry Pi projects, pair this module with appropriately rated switching and protective electronics components and always prioritize electrical safety.