220V 50W Power Led Board Module IP65 2800-3200K Warm White

Compact and robust, this COB LED module integrates a Smart IC driver on an aluminum PCB, enabling direct AC 220–240V operation—no external LED driver required. Ideal for DIY lighting, fixture repairs, and rapid prototyping for both electronics engineers and hobbyists. Works seamlessly in projects where on/off control can be managed by a microcontroller (e.g., Arduino, Raspberry Pi) via a properly rated and isolated AC switching module.

⭐ Key Features

• Direct AC 220–240V input (220V / 230V / 240V) — no external driver needed
• 50W output with warm white color temperature (2800–3200K) for comfortable illumination
• COB LED with integrated SMD Smart IC driver
• CRI (Ra) 80 for natural color rendering
• Wide 270° beam angle for broad light distribution
• IP65 protection against dust and water jets for reliable use in challenging environments
• Aluminum substrate for efficient heat dissipation; long life with proper heatsinking

📊 Technical Specifications

• Power: 50W
• Input Voltage: AC 220–240V (220V / 230V / 240V)
• LED Technology: SMD Smart IC Driver + COB
• Color Rendering Index (CRI): Ra80
• Color Temperature (CCT): Warm White 2800–3200K
• Beam Angle: 270°
• Ingress Protection: IP65
• Housing/PCB Material: Aluminum
• Estimated Lifespan: 30,000 hours (with a suitable heatsink)

🧰 Typical Applications

• Repairing or upgrading existing lighting fixtures and floodlights
• Hobby and maker lighting projects, lamps, and workbench illumination
• Prototyping and testing in electronics labs and workshops
• Microcontroller-based control (e.g., Arduino, Raspberry Pi) via an appropriately rated relay, SSR, or opto-isolated triac module for safe on/off switching

🌡️ Installation & Thermal Management

• Mount the module to a proper heatsink using thermal paste or a thermal pad to maintain safe junction temperatures.
• Ensure good airflow and avoid enclosed spaces without ventilation.
• Respect the IP65 rating: protected against dust and low-pressure water jets; not intended for immersion.

⚠️ Safety Information

• High voltage: This module operates directly from AC mains (220–240V). Use extreme caution.
• Provide adequate electrical insulation and strain relief on all connections; enclose live parts safely.
• Keep away from liquids; moisture ingress can cause electric shock or damage.
• Verify there are no short circuits before powering. Disconnect mains before installation or handling.
• For control via microcontrollers, use proper isolation (relay/SSR/optotriac rated for mains). Follow local electrical codes; installation by qualified personnel is recommended.

This LED module is a dependable choice for electronics components kits, lighting modules, and repair work where voltage, thermal design, and safety are properly managed.