220V 10W Power Led Board Module IP65 2800-3200K Warm White

High-efficiency COB LED module mounted on an aluminum PCB with an integrated SMD Smart IC driver. Designed for direct connection to AC 220–240 V mains, this compact board delivers reliable 10 W warm white illumination with no external LED driver required. Ideal for DIY lighting, fixture repairs, and general-purpose electronics projects. Suitable for both electronics engineers and hobbyists working with mains-powered lighting modules.

✨ Key Features

• ⚡ Direct AC 220–240 V input (220V / 230V / 240V) — no external driver needed
• 🔶 COB LED with integrated SMD Smart IC constant-current control
• 🌤️ Warm White 2800–3200 K with CRI ≥ Ra80 for natural color rendering
• 🛡️ IP65 protection rating for dust and water spray resistance
• 🕘 Rated lifespan: 30,000 hours (with adequate heatsinking)
• 📐 Wide 270° beam angle for broad, uniform illumination
• 🧊 Aluminum substrate for effective thermal conduction

🔧 Overview

This module integrates a COB LED emitter and a Smart IC driver onto an aluminum PCB, enabling simple, space-saving installation in lighting projects. It is well-suited for repairing faulty luminaires, building compact work lights, or creating custom fixtures. While this is a mains-powered light module (not a low-voltage LED), it can be switched from a microcontroller system (e.g., Arduino, Raspberry Pi) using a properly rated isolated relay, SSR, or triac dimmer module for safe control.

⚠️ Safety & Installation Notes

• Mains voltage hazard: Operates directly from AC 220–240 V. Ensure proper electrical insulation, secure strain relief, and safe creepage/clearances. Only qualified users should install.
• Heatsinking required: Mount to an appropriate heatsink (use thermal compound or pad). Lifespan depends on effective thermal management.
• Liquid exposure: Although the module is IP65, exposed terminals and wire connections must be fully sealed. Do not operate when wet; avoid any risk of short circuits.
• Isolation: The PCB may include live areas. Do not touch when powered. Enclose the module to prevent accidental contact.
• Dimming: Dimming compatibility is not specified; if needed, test with a suitable AC dimmer/driver and ensure electrical isolation from control electronics.

📦 Typical Applications

• Fixture repair and retrofit of mains-powered lighting
• DIY/bench lighting for electronics projects and enclosures
• Utility lighting, task lights, and compact luminaires

📊 Specifications

• Power: 10 W
• Input Voltage: AC 220–240 V (220 V / 230 V / 240 V)
• LED Type: COB with SMD Smart IC Chip (integrated driver)
• Color Temperature (CCT): Warm White 2800–3200 K
• Color Rendering Index (CRI): Ra80
• Beam Angle: 270°
• Lifespan: 30,000 hours (with good heatsink)
• Housing/PCB Material: Aluminum
• Ingress Protection: IP65

🧠 For Engineers & Makers

For integration with Arduino, Raspberry Pi, or other microcontroller-based systems, switch the module using an isolated relay/SSR or triac module rated for the appropriate voltage and current. Maintain galvanic isolation between low-voltage control electronics and mains circuits, and always follow applicable electrical codes.